Why Underwear Can Not Ride Up?

Underwear, generally refers to the close-fitting underwear, divided into two kinds of men's and women's clothing. And according to different genders, there are more and more different styles.

 

Ladies' underwear is mainly divided into breathable cotton underwear, satin string bikini panties, and cotton boxer underwear according to its material and style.

 

Men's underwear is mainly divided into triangle underwear, cotton/silk boxer underwear and loose arrow underwear according to its good material and style.

 

This article mainly introduces how to choose suitable men's underwear. There are two main reasons why men's underwear does not buckle.

 

1. The 6-inch leg length is the best length for sitting above the middle of the thigh. This position is usually where the thigh has the largest dimension. The legs outside the panty wrap have more surface to stay in place.

 

2. The specially designed underwear lining can be flush with the body while keeping the waistline on the waistline. When the gusset is not placed flush with the body, the legs will be pulled up during daily activities.

 

The quality of underwear with the following processes will be better, namely, one-piece fabric, four-needle six-thread stitching,

With pockets and laser-cut hem without hemming.

 

One-piece technology is very important to the development of underwear, because the stitching is convex and non-elastic relative to the fabric, which not only rubs the skin but also affects the close-fitting effect. Laser cutting is mainly used in high-end non-marking underwear. It uses a laser beam to cut the fabric, and the high temperature melts the section without sewing. The laser-cut trousers are more elastic than the hemmed trousers, which is not tight for people with thick thighs. Laser-cut underwear is more expensive.

 

Four stitches and six threads are a flat seam. This process does not wear the skin, the seams are firm and have high elasticity, and the elastic effect of the fabric is not affected by the seams. High-end underwear and sportswear use four stitches and six threads.

 

Common Fabrics for Underwear

 

1. High-quality cotton underwear is mainly made of 100% pure cotton and 95% cotton spandex (95% cotton + 5% spandex elastic fiber). Cotton fiber absorbs moisture but does not evaporate easily. Cotton underwear is not easy to dry after sweating, and it is bound to be uncomfortable when wet. Then cotton underwear is easy to loosen up.

 

2. Wool has the functions of warmth, anti-odor, and quick-drying. It is more common in high-end outdoor underwear. It is not easy to loosen up for many days and has no odor. For good wool underwear to wear next to the body, ultra-fine wool with a diameter of ≤17.5 microns should be used.

 

3. High-end knitted underwear will be mixed with a small amount of mulberry silk, while real silk satin underwear needs to use 6A grade silk, which is mostly made into expensive loose and non-stretch Aro pants.

 

4. The advantages of polyester underwear are high strength, strong and durable, suitable for running and playing various sports scenes. The disadvantage is that the fiber strength is high, the wearing feels tight, and the comfort is relatively poor. But now there are some quick-drying polyesters with low denier, and the experience will be close to that of natural fibers.

 

5. The effect of nylon underwear is similar to the wearing experience of polyester. Nylon fiber has better strength and better elasticity. Compression pants and racing swimsuits used for running will use nylon fabrics.